The V3191-01 is a vertical adaptor assembly for Clack WS1 control valves, used where the installation requires pipework to enter and exit the valve from below rather than through the standard side-mounted inlet and outlet ports. It's commonly fitted on cabinet softeners and space-constrained installations where a vertical plumbing arrangement is needed. Supplied as a complete adaptor, it's a straightforward swap or addition for installers reworking pipework layouts. Stocked by WrekinWater as a genuine Clack spare.
Technical specifications
| OEM Part Number | V3191-01 |
| Stock Code | 10440000280 |
| Type | Vertical adaptor assembly |
| Compatible Valves | Clack WS1 control valve |
| Function | Converts valve inlet/outlet connections to a vertical plumbing configuration |
| Brand | Clack Corporation |
Symptoms that mean you need this part
- Your installation needs pipework to enter the WS1 valve vertically rather than from the side
- The existing vertical adaptor is cracked, leaking or missing an o-ring seal
- You're fitting a cabinet softener or space-constrained install where standard side ports won't line up with your pipework
- You're reconfiguring an installation's plumbing layout and need to change the valve's connection orientation
Why it fails / why it matters
Most WS1 valves are plumbed with inlet and outlet connections entering from the side, but not every installation has room for that layout - cabinet softeners, under-sink installs and tight utility cupboards often need the pipework to run vertically instead. The V3191-01 adaptor assembly fits onto the WS1 valve body to redirect the connection orientation, sealed with an o-ring against the valve ports. As with any adaptor carrying full mains pressure, the housing or seal can crack or wear over time, and a weep at the adaptor face is the usual sign it needs replacing.
Why buy this from WrekinWater
WrekinWater has supplied genuine Clack adaptors and valve accessories for over 15 years from its Bettisfield, Shropshire base, stocking parts for the WS1 range alongside Pentair Fleck, Autotrol and Kinetico components so installers can match pipework layouts to the space available. Rated Excellent on Trustpilot and having served more than 50,000 customers, the business ships quickly to keep installation jobs moving.
How to fit it
- Isolate the softener at the bypass valve and shut off the mains supply before disconnecting any pipework
- Remove the existing side-entry fittings or old vertical adaptor from the WS1 valve body
- Inspect the valve ports and o-ring seats for damage or debris before fitting the replacement
- Fit a new o-ring to the V3191-01 adaptor and lubricate lightly with silicone grease
- Fit the adaptor assembly onto the valve body in the correct orientation for your pipework layout and secure it
- Reconnect the pipework, restore the mains supply, and check every joint for leaks before returning the softener to service
Frequently Asked Questions
Unfortunately we are unable to accept returns on our Water Softener Parts So please confirm the correct part is ordered. If you have any doubt please feel free to call us prior to purchase for confirmation.
Clack WS1 Vertical adaptor assembly V3191-01
