Fleck 19121-08SP Electronic Meter Cable 0.91m BF

The Fleck 19121-08SP is a genuine 0.91 metre electronic meter cable that connects the flow meter on the base of a Fleck control valve to the electronic timer board, and WrekinWater supplies it to help metered, on-demand softener and filter owners fix connection faults that stop water use being registered or regeneration being triggered correctly.

Technical specifications

Symptoms that mean you need this part

• The digital display showing zero or unchanging water usage despite normal household consumption
• The softener failing to trigger a regeneration even though the set capacity has clearly been used
• Intermittent or erratic usage readings that jump around without a clear pattern
• The valve regenerating on a fixed schedule instead of responding to actual water use

Why it fails / why it matters

On a metered, on-demand Fleck valve, the meter cable is the sole link carrying the pulse signal from the turbine flow meter to the electronic control board, so the board can count exactly how much water has passed through and calculate when a regeneration is due. Repeated flexing at the connector ends, corrosion from a damp installation location, or simple wear over years of use can break or loosen the connection, and once the signal is interrupted the board either stops counting water use altogether or receives an unreliable signal, which shows up as inaccurate readings or a system that won't regenerate on demand.

Why buy this from WrekinWater

WrekinWater has served more than 50,000 customers over 15 years and, based in Bettisfield, Shropshire, stocks genuine Fleck, Autotrol, Clack and Kinetico components including exact-fit meter cables like the 19121-08SP, so customers get a cable engineered for a reliable connection rather than a generic substitute. As a UK-registered company (No. 11000488) rated Excellent on Trustpilot, WrekinWater helps metered softener owners restore accurate, on-demand regeneration without an unnecessary engineer visit.

How to fit it

1. Turn off power to the control valve at the transformer or isolator
2. Locate the existing meter cable running from the meter body to the control board
3. Disconnect the cable at both the meter end and the control board end
4. Compare the old cable's connectors to the new Fleck 19121-08SP to confirm a matching fit
5. Route and connect the new cable securely at both ends, avoiding sharp bends or trapping points
6. Restore power and check the display registers water flow correctly by running a tap and watching the usage counter