Replacement Clip for securing 2.5in Diameter filters c/w scew

This securing clip, supplied complete with a mounting screw, is made to hold standard 2.5 inch diameter inline filters neatly against a cabinet side or wall. WrekinWater sells it as a simple fix for filters that are currently left hanging loose on their own tubing, which is common with domestic drinking water and RO inline filters. It's a small, inexpensive part that makes an under-sink or utility installation look and function far tidier.

Why you might need this

• You're tidying up an inline filter that's currently hanging unsupported on its tubing.
• The original clip supplied with your system has gone missing or broken.
• You're wall or cabinet-mounting a filter for the first time.
• You need a spare clip when adding an extra inline filter to your setup.

An unsupported inline filter hangs by its own connecting tube and push-fit fittings, which weren't designed to carry that weight long-term. Over time this can put a steady strain on the connectors, increasing the risk of a slow leak or a fitting working loose. A properly fitted clip takes the weight off the tubing and holds the filter flat against a wall or cabinet side, which is both neater and kinder to the fittings.

WrekinWater is a family run water treatment company based in Bettisfield, Shropshire, with more than 50,000 customers served over 15 years and an "Excellent" rating on Trustpilot. We stock the small fittings and hardware that keep domestic drinking water and RO systems properly supported, not just the filters themselves.

How to fit it

1. Choose a suitable position on the cabinet side or wall near the filter's plumbed-in location.
2. Hold the clip against the surface and mark the screw hole.
3. Fix the clip in place using the supplied screw.
4. Slide the 2.5in filter housing into the clip until it seats securely.
5. Check the filter sits level and isn't pulling on the connecting tube.