Pallas (Sita) 80/2 LCD PLUS - 2 x 80 W 12m3/hr (30 mJ) 1.5"

Sita 80/2 LCD PLUS RACK: Twin-Lamp UV Disinfection System with Lamp Countdown, 2 x 80W (12 m³/hr)

The Sita 80/2 LCD PLUS is the entry point into SITA's RACK series — industrial UV systems that house multiple 80W lamps inside a single stainless steel chamber to cover higher flow rates than the standard single-chamber LCD models. It's manufactured in Italy to ISO 9001 quality standards and WRAS approved, with a 304 stainless steel chamber (316 optional).

The PLUS control adds a UV intensity meter (or temperature meter), a resettable countdown hour meter with an end-of-lamp-life alarm, on-screen irradiation/temperature display, and automatic shutdown if the chamber overheats — on top of the standard LCD display, hours-run meter, fault light and alarm relay contact.

Specifications

Who it's for

• Commercial and light industrial sites wanting live UV intensity monitoring, not just a lamp-failure alarm
• Sites where high-temperature protection for the chamber matters
• The entry point into SITA's multi-lamp RACK series before stepping up to the 80/3, 80/4 or 80/5

Why it matters

UV systems should be sized generously against your actual site flow rate — as a rule of thumb, the UV's rated flow should be at least 4 times your required or achievable flow, or you should restrict flow to no more than 38% of the system's maximum rating. We'd also recommend physical pre-filtration ahead of the UV rather than relying on the UV alone: a triple-filter setup (5 micron string wound, 1 micron polyspun, then a 0.45 micron absolute filter) is a common specification, with two absolute filters in parallel where higher flow is needed.