Pallas (Sita) 80/3 LCD PLUS RACK - 3 x 80 W 20m3/hr (30 mJ) Connections 2"

Sita 80/3 LCD PLUS RACK: 3-Lamp UV Disinfection System with Lamp Countdown, 3 x 80W (20 m³/hr)

The Sita 80/3 LCD PLUS steps up SITA's industrial RACK series to three 80W lamps housed in a single stainless steel chamber, covering a substantially higher flow rate than the twin-lamp 80/2. It's manufactured in Italy to ISO 9001 quality standards and WRAS approved, with a 304 stainless steel chamber (316 optional).

The PLUS control adds a UV intensity meter (or temperature meter), a resettable countdown hour meter with an end-of-lamp-life alarm, on-screen irradiation/temperature display, and automatic shutdown if the chamber overheats — on top of the standard LCD display, hours-run meter, fault light and alarm relay contact.

Specifications

Who it's for

• Commercial and industrial sites wanting live UV intensity monitoring, not just a lamp-failure alarm
• Sites where high-temperature protection for the chamber matters
• Applications between the 80/2's capacity and the larger DN80-connection 80/4 and 80/5

Why it matters

UV systems should be sized generously against your actual site flow rate — as a rule of thumb, the UV's rated flow should be at least 4 times your required or achievable flow, or you should restrict flow to no more than 38% of the system's maximum rating. We'd also recommend physical pre-filtration ahead of the UV rather than relying on the UV alone: a triple-filter setup (5 micron string wound, 1 micron polyspun, then a 0.45 micron absolute filter) is a common specification, with two absolute filters in parallel where higher flow is needed.